Home

Length: 23”
Weight: 5.8 lbs
Standard bar: 12”
Max flow: 4-8 gpm
Max pressure: 2000 psi
Connecting threads: 3/8” M JIC
Open or closed center

Weight: 55.1 lb.
Length: 28.8 in.
Depth: 11 in.
Width across handles: 23 in.
Impact energy: 22-25 joules
Blow frequency: 2,700 bpm
Drill depth: 19.7 ft.
Engine type: 1 cylinder, two-stroke
Cylinder displacement: 185 cc
Power: 2.7 hp
Cooling system: fan cooled
Starter system: Magnapull
Fuel type: Gas, 90-100 octane unleaded
Fuel capacity: 0.32 gal.
Fuel mixture: 2%
Fuel consumption: 0.29 gph – 0.37 gph
Alkylate: no
Vibration level 3 axes (ISO 28927-10): 5,8 (breaking), 9,3 (drilling) m/s2
Sound power level guaranteed (2000/14/EC): 108 dB(A)
Sound pressure level (ISO 11203): 95 Lp. dB(A)
Shank size: Hex 22×108 mm – 7/8 x 4 ¼ inch

Aus 125 Hammer Drill Details

Power Supply: Gasoline motor

Rope Speed at Rated Load: 40’ (12 m) per minute

Strength Rating – Ultimate: 1000 lb

Style: 1,000 lb. Gas hoist

Weight: 46.0 lbs

OR

Power Supply: Gasoline motor

Rope Speed at Rated Load: 11’ (3.4 m) per minute

Strength Rating – Ultimate: 3000 lbs.

Style: 3,000 lb. Gas hoist

Weight: 58.0 lbs.

Width (in): 5.20
Height (in): 12.80
Product description: hydraulic remote, remote power operated
CULUS: N
ROHS compatible: exempt
Pressure (operating): 10000
Crimp force: 12 tons
Covered head: N

Width (in): 2.9
Length (in): 16.8
Height (in): 13.4
Weight lbs: 11
Crimp force: 6 tons
Force developed: 6 tons
Operating voltage: 18

Width (in): 3.26
Length (in): 18.65
Height (in): 13.75
Weight lbs: 16.79
ROHS compatible: under investigation
CULUS: N
Crimp force: 15 ton

Application – For Use On:Tension Sleeves, Taps, Aerial Cable, Terminals & Splices, HYGROUND®(Compression Grounding)
Tool Type:LPHT KOMPRESSOR™ Remote Operated
Trade Name:KOMPRESSOR™
Dimensions:
Length:15.63 in
Width:5.54 in
Crimping Ranges: Tension Sleeves- Copper:#8 sol. – 500 kcmil, Aluminum :#8 sol. – 587.2 kcmil, ACSR:#4 – 556.5 kcmil; Taps-Copper:#14 sol.- 500 kcmil, Aluminum #8 – 500 kcmil; Aerial Cable- Copper:#6 – 500 kcmil; Terminals & Splices-Copper:#8 – 750 kcmil, Aluminum:#8 – 750 kcmil, ACSR:#4 – 556.5 kcmil; HYGROUND®(Compression Grounding)-Copper:#8 – 500 kcmil, Ground Rods 1/2” – 1” diameter
Certification – CSA Approved:No
Certification – ETL:No
Certification – UL Recognized:No
Certification – cULus:No
Standards – RoHS Compliance Status:EX
UL Listed:No

Width (in): 2.80
Length (in): 21.3
Height (in): 4.25
Warranty: 1 year limited on tools, batteries
Weight lbs: 7.5
ROHS Compatible
Crimp Force: 6 tons (5.4 metric tons)
Force Developed: 6 tons
Operating Voltage: 18 V-DC
Recharge Time: 30 minutes
Accepts Dies: Y
Tool Type: Dies Required
Battery Type: Li-ION

Width (in):  3.5
Length (in):  14.5
Height (in):  13.75
Weight lbs:  16.3
ROHS Compatible:  Exempt
CULUS:  N
Pressure (Operating):  7800
Crimp Force:  6 tons (5.4 metric tons)
Force Developed:   12 tons
Operating Voltage:  18 VDC
Recharge Time:   30 minutes
Accepts Dies:  N
Tool Type:   Dieless
Battery Type:  Li-ION

Width (in): 3.5
Length (in): 17.5
Height (in): 13.5
Weight lbs: 18.4
ROHS compatible: Exempt
CULUS: N
Pressure (operating): 10000
Crimp force: 12 tons
Force developed: 12 tons
Operating voltage: 18 VDC
Recharge time: 45 minutes
Accepts dies: Y
Tool type: dies required
Battery type: Ni-MH

Width (in): 3.5
Length (in): 15.75
Height (in): 13.5
Weight lbs: 15.7
Product description: Hydraulic self, 12 ton, 18V Lithium ion
ROHS compatible: Exempt
CULUS: N
Pressure (operating): 10000
Crimp force: 12 tons
Force developed: 12 tons
Operating voltage: 18 VDC

Width (in): 3.7
Length (in): 17.6
Height (in): 13.9
Weight lbs: 14
ROHS compatible: Exempt
CULUS: N
Pressure (operating): 7800
Crimp force: 6 tons (5.4 metric tons)
Force developed: 6 tons
Operating voltage: 18 VDC

Acme tools air shipment restricted: N
Acme tools brand name: Burndy
Application: Cable cutting
Assembled weight (lbs): 25.2
Color / finish: red tool housing / black rubber molding
Package weight: 25.2
Product name: 1.29 in. ACSR latch cutter, 18V 3Ah Li-Ion

Battery Type: 3.0 Ah Li-Ion
Crimp Force Capacity: 10 ton
Recharge Time: 0.5 h
Sub Brand: Patriot Cutter
Tool Type: Battery actuated cutting tool
Trade Name: Patriot
Type: Cutters
Height: 13.46 in
Length: 16.47 in
Weight: 15.5 lb
Width: 3.27 in
Operating Voltage: 18V DC

Certification – CSA Approved: No
Certification – ETL: No
Certification – UL Recognized: No
Certification – cULus: No
Standards – RoHS Compliance Status: UI
UL Listed: No

Battery type: 3.0 Ah Li-Ion
Crimp force capacity: 6 ton
Recharge time: 0.5 h
Sub brand: Patriot Cutter
Tool type: Battery actuated cutting tool
Trade name: Patriot
Type: Cutters
Height: 13.5 in
Length: 14.5 in
Weight: 10.2 lb
Width: 3.5 in
Operating voltage: 18V DC
Certification – CSA approved: No
Certification – ETL: No
Certification – UL recognized: No
Certification – cULus: No
Standards – RoHS compliance status: EX
UL listed: No

Width (in): 3.26
Length (in): 24.31
Height (in): 15.33
Weight lbs: 20.3
ROHS compatible: Non-compliant
Cutting capacity: up to 4” O.D. aluminum and copper
Operating voltage: 18

Width (in): 2.8
Length (in): 21.3
Height (in): 4.25
Weight lbs: 7.5
ROHS compatible: Exempt
CULUS: N
Pressure (operating): 7800
Crimp force: 6 tons (5.4 metric tons)
Force developed: 6 tons
Operating voltage: 18 volt lithium-ion

Produce description: Patriot in-line cutting tool; 4.5 metric tons; battery powered crimping tool
ROHS compatible: under investigation
CULUS: N
Cutting capacity: Copper – 500 kcmil (.93” (24 mm) max. insulation dia.)
Aluminum – 636 kcmil orchid (0.93” (24 mm) max. insulation dia.)
ACSR – 556.5 kcmil dove 26/7 (0.93” (24 mm) max. dia.)
Copper weld/alumaweld – 3/8” dia. (10 mm) (approx. #4 AWG depending on stranding)
Rebar – 3/8” dia. (10 mm)
Recharge time: 30 minutes
Battery type: Li-Ion

Width (in): 8.06 (without stand)
Height (in): 12.93 (without stand)
Weight lbs: 43
Product description: Hydraulic remote, 4/0 str.-2500
Kcmil Cu 3/0 str.-2500 kcmil Al
ROHS compatible: Exempt
CULUS: N
Pressure (operating): 10000
Crimp force: 60 tons

Width (in): 3.5
Length (in): 14.5
Height (in): 13.75
Weight lbs: 10.9
ROHS compatible: Exempt
CULUS: N
Pressure (operating): 7800
Crimp force: 6 tons (5.4 metric tons)
Force developed: 6 tons
Operating voltage: 18 VDC

Engine: two stroke, forced-air cooled, single cylinder
Displacement: 55 cm3
Fuel tank capacity: 0.31 Gal
Fuel: mixture: synthetic oil 1:50 or 2 stroke mineral oil 1:25
Motor revolutions (to the minute): 2800 rpm
Engine revolution (loaded, impact): 7000 rpm
Engine revolution (non-loaded, max.): 11500 rpm
Start: digital; spark plug type RAX80 or equivalent
Carburetor type: diaphragm
Impact unit square driver size: 1 in.
Impact unit max. fastening torque range: 2500Nm
Height: 10.79 in.
Width: 16.97 in.
Length: 25.2 in.
Weight: 42.24 lbs

Force developed:  132 kN
Length:  15.55 in.
Height:  14.65 in.
Width:  3.27 in.
Weight:  17.82 lbs.
Battery voltage:  18 V
Battery current:  4 Ah

Force developed: 63kN
Length: 11.81 in.
Height: 13.5 in.
Width: 3.27 in.
Weight: 9.24 lbs.
Battery material: Li-Ion
Battery voltage: 18 V
Battery current: 4 Ah
Min operating temperature range: 5 F
Max operating temperature range: 122 F

Type of action: Crimp
Force developed: 50 kN
Height: 5.71 in.
Width: 3.46 in.
Length: 19.49 in.
Weight: 7.48 lbs.
Battery material: Li-Ion
Battery voltage: 18 V
Battery current: 2 Ah

Type of action: Cutting
Battery material: Li-Ion
Battery voltage: 18 V
Battery current: 4 Ah
Maximum cutting diameter: 1.97 in.
Length: 15.94 in.
Width: 3.27 in.
Height: 15.67 in.
Weight: 12.76 lbs.

Height: 15.79 in.
Width: 3.46 in.
Length: 16.02 in.
Weight: 14.74 lbs.
Maximum cutting diameter: 1.77 in.
Type of action: Cutting
Battery voltage: 18 V
Battery current: 4 Ah

Type of action: cutting
Maximum cutting diameter: 2.56 in.
Nominal pressure: 10,150 psi
Impulse voltage: 18 V
Battery current: 4 Ah
Height: 16.89 in.
Width: 16.34 in.
Length: 3.27 in.
Weight: 14.08 lbs.

Type of action: cutting
Battery material: Li-Ion
Battery voltage: 18 V
Battery current: 4 Ah
Maximum cutting diameter: 2.17 in.
Length: 17.36 in.
Height: 16.69 in.
Width: 3.43 in.
Weight: 19.58 lbs.

Weight:  42.9 lbs.
Motor power:  1 kW
Motor power:  1.3 HP
Displacement:  35.8 cm3
Engine:  four cycle
Fuel:  unleaded regular grade gasoline
Start:  by rope pul
Clutch:  Centrifugal with automatic intervention

Weight:  42.9 lbs.
Motor power:  1 kW
Motor power:  1.3 HP
Displacement:  35.8 cm3

Opening of the head:  0.98 in.
Battery material:  Li-Ion
Battery voltage:  18 V
Battery current:  4 Ah
Length:  15.98 in.
Height:  9.41 in.
Width:  4.04 in.
Weight:  14.3 lbs.

Operating pressure: 5,000 psi / 345 Bar
Maximum spreading force: 65,000 lbs. / 289 kN
Spreading distance: 28.0” / 711 mm
Parallel travel: 16.0” / 406 mm
Weight: 51.9 lbs. / 23.5 kg
Length: 28.0” / 711 mm
Width: 12.5” / 317 mm
Height: 8.0” / 203 mm

Operating pressure: 10,500 psi / 724 Bar
Maximum cutting force: 248,000 lbs. / 1103 kN
Cutter opening: 4.5” / 114 mm
Weight: 30.5 lbs. / 13.8 kg
Length: 27.5” / 698 mm
Width: 6.3” / 160 mm
Height: 6.8” / 173 mm

Operating pressure: 10,500 psi / 724 Bar
Maximum spreading force: 140,000 lbs. / 623 kN
Spreading distance: 28.0” / 711 mm
Parallel travel: 16.0” / 406 mm
Weight: 51.9 lbs. / 23.5 kg
Length: 28.0” / 711 mm
Width: 12.5” / 317 mm
Height: 8.0” / 203 mm